400-351 | Your customer wants to configure LSCs and asks for specific…

Question: 8

Your customer wants to configure LSCs and asks for specific information about which number to configure in the text box right next to the “Number of Attempts” .Which statement is true?

A. The default number of attempts is 100.
B. A value of 2 means that if an AP fails to join the Cisco WLC using an LSC, the AP attempts to Join the Cisco WLC using the default certificate
C. A value of 255 means that if an AP fails to join the Cisco WLC using an LSC, the AP does not attempt to join the Cisco WLC using the default .
D. A value of 3 means that if a user fails to authenticate, the user is disconnected after three retries.

Answer: B

400-351 | Your customer wants to configure…

Question: 7

Your customer wants to configure LSCs and asks for specific information about which number to configure in the text box right next to the “Number of Attempts” .Which statement is true?

A. The default number of attempts is 100.
B. A value of 2 means that if an AP fails to join the Cisco WLC using an LSC, the AP attempts to Join the Cisco WLC using the default certificate
C. A value of 255 means that if an AP fails to join the Cisco WLC using an LSC, the AP does not attempt to join the Cisco WLC using the default .
D. A value of 3 means that if a user fails to authenticate, the user is disconnected after three retries.

Answer: B

400-351 | 802.11k and 802.11k-enabled client…

Question: 6

802.11k and 802.11k-enabled client devices send a request for a list of neighbor APs (a neighbor list) from the APs they are currently associated with. What is this 802.11 management frame also known as?

A. association response
B. association packet
C. beacon frame
D. action packet

Answer: D

400-351 | You have received a new Cisco 5760 Controller…

Question: 5

You have received a new Cisco 5760 Controller and have gone through the initial startup wizard. You are now trying to add APs to the controller, but these are not joining. Which three checks should you do next? (Choose three.)

A. Check that the radios are not in a shutdown state.
B. Check the country code of the controller. The APs do not join the controller if the country code does not match.
C. Check that the correct time is set on the controller.
D. Check that option 53 has been set in the DHCP scope.
E. Check that the controller has enough AP licenses.
F. Check that the controller has been configured with the correct hostname. Otherwise, DNS resolution fails.

Answer: B,C,E

400-351 | Two autonomous Aps are connected…..

Question: 4

Two autonomous Aps are connected to a switch on the same VLAN both APS are configured with the same SSID and WPA2-PSK. After making configuration changes to one of the APs .spanning tree disabled one of the switch ports into which AP was plugged.? Which two options describe possible reasons that spanning tree disabled a port? (choose Two)

A. One of the Aps was configured as a universal workgroup bridge.
B. It is not possible for spanning tree to disable a port. The bridging loop must have been coincidental
C. Spanning tree was disabled on both Aps
D. PortFast was enabled on all ports
E. One of the APs was configured as a standard workgroup bridge.

Answer: A,E

400-351 | If a guest anchor controller…

Question: 2

If a guest anchor controller is used outside the firewall,which firewall ports must you open for guest access including SNMP and mobility features to work in a Cisco unified wireless network?

A. UDP 16667. IP Protocol97. UDP 500 501
B. UDP 16666 .IP Protocol97. UDP 162 163
C. UDP 12222 .IP Protocol97. UDP 161 162
D. UDP 16666 . IP Protocol 97. UDP 161 162
E. UDP 12223 . IP Protocol 97. UDP 161 162

Answer: D

400-351 | If a guest anchor controller is used…

Question 2:

If a guest anchor controller is used outside the firewall, which firewall ports must you open for guest access including SNMP and mobility features to work in a Cisco unified wireless network?

A. UDP 16667. IP Protocol97. UDP 500 501
B. UDP 16666 .IP Protocol97. UDP 162 163
C. UDP 12222 .IP Protocol97. UDP 161 162
D. UDP 16666 . IP Protocol 97. UDP 161 162
E. UDP 12223 . IP Protocol 97. UDP 161 162

Answer: D

400-351 | You have added your active…

Question 1:

You have added your active directory server to the cisco ISE and see the status as operational..however when you try to add active directory groups to your authorization policy conditions in the Cisco ISE, non active Directory groups appear, what is the most likely reason?

A. The credentials used to join the Cisco ISE to active directory do not have succulent privileges to query active directory.
B. You did not add any attribute in the Active Directory join point under the External identify source
C. You did not add any groups in the Active Directory jom potnt under the External identity source
D. A firewall is blocking tcp port 389 between the Cisco ISE and active directory.

Answer: C

Free 400-351 Exam Dumps exam questions answers. These Q&A online braindumps are free to use for your 400-351 Exam Dumps practice test. We keep adding more questions so keep coming to get dumps.

Leave a Comment.